Installation

Power Window Regulator Motor ASSY (Installed To The Front Side)

INSTALLATION

NOTE: This procedure refers to LH side. Unless otherwise specified, the RH side and the LH side follow the same steps.

1. Installation of power window regulator motor ASSY RH
1. Using Torx socket wrench T25, with the 3 Torx screws, install the power window regulator motor ASSY LH onto the front door window regulator RH.

Standard value: T = 6.0 N.m {61 kgf.cm} {4.4 ft.lbf}

2. Installation of front door window regulator W/motor ASSY
3. Installation of front door frame SUB-ASSY RR LWR LH
4. Installation of front door glass SUB-ASSY LH
5. Adjustment of front door glass SUB-ASSY LH
1. Check the installation condition of front door glass.
2. Check the mounting condition of front door glass.

6. Installation of front door service hole cover LH
7. Installation of power window regulator master switch ASSY W/front armrest base panel UPR LH (driver's side door)
8. Installation of power window regulator switch ASSY W/front armrest base panel UPR RH (passenger's side door)
9. Installation of front door trim board SUB-ASSY LH
10. Installation of door armrest cover LH
11. Connection of battery ground terminal
12. Registration settings of power window
13. Operation inspection of power window