Removal

Power Window Regulator Motor ASSY (Installed To The Front Side)

REMOVAL

NOTE: This procedure refers to LH side. Unless otherwise specified, the RH side and the LH side follow the same steps.

1. Disconnection of battery ground terminal
2. Removal of door armrest cover LH
3. Removal of front door trim board SUB-ASSY LH
4. Removal of power window regulator master switch ASSY W/front armrest base panel UPR LH (driver's side door)
5. Removal of power window regulator switch ASSY W/front armrest base panel UPR RH (passenger's side door)
6. Removal of front door service hall cover LH
7. Removal of front door glass SUB-ASSY LH
8. Removal of front door frame SUB-ASSY RR LWR LH
9. Removal of front door window regulator W/motor ASSY







10. Removal of power window regulator motor ASSY LH
1. Using Torx socket wrench T25, remove the 3 Torx screws, and remove the power window regulator motor ASSY LH from the front door window regulator LH.