Trunk / Liftgate Interior Trim Panel: Service and Repair

Rear Gate Trim







REMOVAL

1. Remove the trim panel - rear gate UPR.
1. Remove the claws on the trim edge.
2. Release the claws in the center of trim, and remove the trim panel - rear gate UPR.







2. Remove the trim panel - rear gate pillar side.
1. Release the claws.
2. Remove the claws on the bottom of trim, and remove the trim panel - rear gate pillar side.







3. Remove the trim panel - rear gate LWR.
1. Remove the clips on both ends.
2. Release the clips, and remove the trim panel - rear gate LWR.







INSTALLATION

Install each part in the reverse order of removal.