Basic Diagnostic Procedure
Basic Diagnostic ProcedurePROCEDURE
CAUTION:
^ The power steering control module continues to operate after the engine stops and calculate the temperature in the control module. Therefore, before starting service of the power steering system which requires disconnection of the connector, stop the engine and allow approx. 10 minutes until the control module becomes cold.
^ Before removal or installation, be sure to remove any foreign matter (dust, moisture, oil, etc.) from the power steering control module connector.
NOTE:
^ Shake the connector at the suspected trouble location to check for open or short circuits of the harness.
^ Refer to "Check List for Interview". Check List For Interview
