Tightening Torque

Clutch Cover
Install the clutch cover to the flywheel and tighten the bolts to the specified torque.

When installing a clutch cover to the flywheel, position the clutch cover so that the spacing between the unbalance marks (paint mark) on the flywheel and clutch cover is 120° or more apart. (The unbalance mark indicates the direction of residual unbalance.)
Temporarily tighten the bolts by hand. Each bolt should be tightened to the specified torque in a crisscross order.

Tightening torque 16 Nm (1.6 kgf-m, 11.8 ft-lb)