Rear Axle Assembly

Rear Axle

ASSEMBLY

BUSHING - REAR AXLE HOUSING

Do not remove the housing assembly - rear axle because the bushing - rear axle housing cannot be replaced. If it is removed, replace the housing assembly - rear axle.

BUSHING - TRAILING LINK

1) Before assembly, inspect the following items and replace any faulty part with a new one.
^ Perform visual check for damage or bend on the trailing link.
^ Visually check the bushing for abnormal cracks, fatigue or damage.
2) Press-fit the bushing using ST and the hydraulic press.

CAUTION:
Make sure to press the bushing straight in.

Preparation tool:
ST1: BUSHING REMOVER (20099FG000)
ST2: INSTALLER & REMOVER (BASE) (20099PA010)