Removal

MT Gear Shift Lever

REMOVAL

1) Disconnect the ground cable from battery.
2) Remove the console box.
3) Remove the gear shift knob and remove the cover - shift lever.





4) Remove the panel center LWR LH and RH.
5) Remove the clamp.





6) Remove the boot and insulator assembly.





7) Remove the harness clamp from the plate COMPL.





8) Remove the plate COMPL from the vehicle body.





9) Lift up the vehicle.
10) Remove the center exhaust pipe.
11) Remove the center exhaust cover.





12) Remove the stay from the shift bracket.





13) Remove the rod from joint.





14) Remove the cushion rubber from the vehicle body.





15) Extract the spring pin and remove the joint.





16) Lower the vehicle.
17) Remove the gear shift lever.