Front Door Window Glass: Service and Repair

Front Door Glass







REMOVAL

1. Remove the trim panel - front door.
2. Remove the sealing cover - front door.

CAUTION:
- Carefully remove the butyl tape. Excessive force will easily break the sealing cover - front door.
- If the sealing cover - front door gets broken, replace it with a new part.

1. Remove the screw to remove the bracket - door trim front.
2. Carefully remove the butyl tape to remove the sealing cover - front door.







3. Remove the front door inner pad.

CAUTION: If the clip is damaged, replace it with a new part because the panel assembly - front door may be deformed.

4. Attach the battery ground cable and the switch - power window, and turn the ignition to ON.
5. Remove the glass assembly - front door.
1. Operate the switch - power window to move the glass assembly - front door to the position where the mounting bolts can be seen.
2. Remove the bolt.







3. While tilting the glass, remove the glass assembly - front door.

CAUTION: Avoid impact and damage to the glass assembly - front door.







6. Remove the glass - front door partition.
1. Remove the bolts and screws, and then remove the sash COMPL - partition.







2. Remove the glass - front door partition.







INSTALLATION

CAUTION: Check that the running channel - front door is securely fixed to the panel assembly - front door and to the sash COMPL - partition.

Install each part in the reverse order of removal.

Tightening torque:
Refer to "COMPONENT" of "General Description". [Ref. to FRONT DOOR GLASS, COMPONENT, General Description.]