Neutral Switch & Backup Switch
Switches and HarnessREMOVAL
BACK-UP LIGHT AND NEUTRAL POSITION SWITCH
1) Disconnect the ground cable from battery.
2) Remove the intercooler.
3) Disconnect the connector back-up light switch & neutral position switch.
4) Lift up the vehicle.
5) Remove the back-up light switch & neutral position switch with the harness.
INSTALLATION
BACK-UP LIGHT AND NEUTRAL POSITION SWITCH
1) Install the back-up light switch & neutral position switch with the harness.
Tightening torque:
32.3 Nm (3.3 kgf-m, 23.8 ft-lb)
2) Connect the connectors of back-up light switch & neutral position switch.
3) Install the intercooler.
4) Connect the battery ground terminal.