6MT(Diag)
CAUTIONThe airbag system wiring harness is routed near the DCCD control module.
CAUTION:
^ Airbag system wiring harnesses and connectors are yellow. Do not use an electric test equipment to check these circuits.
^ Be careful not to damage the airbag system wiring harness when performing diagnostics or repair of the DCCD control module.
^ When measuring the voltage and resistance of each control module or each sensor, use a tapered pin with a diameter of less than 0.64 mm (0.025 in) in order to avoid poor contact. Also, do not insert the pin more than 5 mm (0.2 in) into the part.