Read Diagnostic Trouble Code (DTC)
Subaru Select MonitorRead Diagnostic Trouble Code (DTC)
OPERATION
1) Using the Subaru Select Monitor, on the [[Main Menu]] display, select {Each System Check}.
2) On [[System Selection Menu]] display, select {Transmission Control System}.
3) After the {Center Differential Control} is displayed, select [OK].
4) On [[Transmission Diagnosis]] display, select {Diagnostic Code(s) Display}.
5) On the [[Diagnostic Code(s) Display]] screen, select the {Temporary Diagnostic Code(s)} or {Memorized Diagnostic Code(s)}
NOTE:
^ For detailed operation procedures, refer to "PC application help for Subaru Select Monitor". Operation
^ For details concerning DTCs, refer to "List of Diagnostic Trouble Code (DTC)". List of Diagnostic Trouble Code (DTC)