Installation

INSTALLATION

1) Before installation, inspect the following items and replace any faulty part with a new one.
^ Check the bushing for abnormal cracks, fatigue or damage.
^ Check the stabilizer link for damage.
2) Install each part in the reverse order of removal.

CAUTION:
The stabilizer bracket has a set orientation. Install it with the arrow mark facing the front side (1) of the vehicle.





Tightening torque:
Stabilizer bracket: 25 Nm (2.55 kgf-m, 18.4 ft-lb)
Stabilizer link: 60 Nm (6.12 kgf-m, 44.3 ft-lb)
Front wheel: 120 Nm (12.24 kgf-m, 88.5 ft-lb)