Removal and Replacement

Sunroof Assembly







REMOVAL

CAUTION: When removing the clip, use great care not to damage the roof trim.

1. Remove the glass lid.
1. Completely close the glass lid, and then open the sunshade.
2. Disconnect the claws and then remove the lid cover.







3. Remove the bolts, then remove the glass lid.

CAUTION: Be careful not to damage the glass lid.







2. Remove the roof trim.
3. Disconnect the sunroof motor connector.
4. Remove the frame assembly.
1. Remove the drain tube.







2. Remove the bolts and then remove the sunroof bracket.







3. Remove the bolts, then remove the frame assembly.







INSTALLATION

CAUTION: Be careful not to snag the harness.

Install each part in the reverse order of removal.

Tightening torque:
Refer to "COMPONENT" of "General Description". [Ref. to COMPONENT, General Description.]

NOTE:
- Be sure to connect the harness connector.
- When installing the drain tube, insert it securely into drain pipe.

Length A:
15 mm (0.59 in) or more