Subaru Select Monitor

Subaru Select Monitor

OPERATION

For the operation procedure, refer to the "PC application help for Subaru Select Monitor".

NOTE:
If TPMS & keyless entry CM or TPMS CM and Subaru Select Monitor cannot communicate, check the communication circuit.

INSPECTION

COMMUNICATION FOR INITIALIZING IMPOSSIBLE

DETECTING CONDITION:

Defective harness connector

TROUBLE SYMPTOM:

Communication is impossible between the TPMS & keyless entry CM or TPMS CM and the Subaru Select Monitor.














Read Diagnostic Trouble Code (DTC)

OPERATION

For operation procedures, refer to the "PC application help for Subaru Select Monitor".

NOTE:
^ For details concerning DTCs, refer to List of Diagnostic Trouble Code (DTC). TPM
^ All DTCs detected will be displayed.
^ If a particular DTC is not properly stored in memory (due to a voltage drop of the TPMS & keyless entry CM or TPMS CM power supply, etc.) when a problem occurs, a DTC suffixed with a question mark appears on the Subaru Select Monitor display. This shows it may be an unreliable reading.
^ When DTC is not displayed, check the indicator circuit and communication circuit. Tire Pressure Warning Light / Trouble Indicator Light Illumination Pattern