Windows: Testing and Inspection

INSPECTION







OPERATION

1. RESET OPERATION A
1. Sit in the driver's seat and close the door.
2. Turn the ignition switch to ON.
3. Operate the power window main switch to open the window glass halfway.
4. Operate the power window main switch to "UP" direction to fully close the driver's side window glass.
5. While the window glass is fully closed, hold down the power window switch to "UP" direction for one second.
6. Operate the power window main switch to "AUTO DOWN" direction to check whether the window fully opens properly.

NOTE: If the window does not fully open properly, repeat steps 1) to 6).

2. RESET OPERATION B
1. Sit in the driver's seat and close the door.
2. Turn the ignition switch to ON.
3. Perform "AUTO UP" operation for the driver's side window glass, by fully pulling up the power window main switch to cause the reverse operation (in reverse operation, the window is repeatedly fully closed and then reversed to open it slightly.) 10 times in row.
4. Check that the "AUTO UP" does not operate.
5. Perform reset operation A.
6. Check that the window operates properly by operating the "AUTO UP" and "AUTO DOWN" switch.

NOTE: If the window does not fully open/close properly, repeat steps 1) to 6).