Cowl Moulding / Trim: Service and Repair

Cowl Panel







REMOVAL

1. Remove the wiper arm.
2. Remove the weather strip clips, and remove the weather strip.







NOTE: If the weather strip clip is removed with excessive force, the weather strip may be damaged. Be sure to use a clip remover to remove.







3. Remove the clip (A) and remove the cowl panel side.







4. Pull and remove the cowl panel RH.

CAUTION: Before removing the cowl panel, use a air blower and nylon brush to sweep gravel from the lower area of the front side of the glass.







5. Remove the cowl panel LH.

INSTALLATION

CAUTION: Before installing the windshield glass and cowl panel, make sure there are no gravel in the installing area.

Install in the reverse order of removal.

NOTE: Hook the craw of cowl panel to the windshield.