Rear Quarter Trim

Rear Quarter Trim

REMOVAL

1. Remove the third-row seats.
2. Remove the rear door scuff plate.
3. Remove the lower anchor cover.







4. Remove the luggage floor mat and utility box.
5. Remove the luggage floor end cover.







6. Remove the cover, and remove the bolts inside.







7. Remove the rear quarter lower trim.







8. Remove the lower anchor bolts of second-row seat belts.







9. Remove the upper and lower anchor bolts of third-row seat belts.







10. Remove the screws.







NOTE: For models equipped with a third-row seat, there is a cap.

11. Remove the cover (A), and remove the bolts inside.







12. Remove cap (A) on the upper side of the pillar trim, and remove the bolt inside.
13. Disconnect each connector, and remove the rear quarter upper trim.







INSTALLATION

Install in the reverse order of removal.