Ball Joint
Front Ball JointMeasure the play of the ball joint using the following procedures. Replace with a new part if the play exceeds specification.
With 980 N (100 kgf, 220 lb) loaded in direction shown in the figure, measure the distance L1.
With 980 N (100 kgf, 220 lb) loaded in direction shown in the figure, measure the distance L2.
Determine free play using the following formula.
S = L2 - L1
Replace with a new part if the play exceeds specification.
Front ball joint
Specification for replacement S Less than 0.3 mm (0.012 in)