Installation

Front Stabilizer

INSTALLATION

Install in the reverse order of removal.

CAUTION:
^ Be sure to use a new flange nut.
^ Install so that the paint mark on the stabilizer is on the left side of the vehicle.
^ Install the stabilizer bushing (front crossmember side) while aligning it with the paint mark on stabilizer.

Tightening torque:
Stabilizer link:
60 Nm (6.1 kgf-m, 44.3 ft-lb)
Stabilizer clamp:
25 Nm (2.5 kgf-m, 18.1 ft-lb)