Removal

AT Shift Lock Solenoid and "P" Range Switch

REMOVAL

NOTE:
For removal of the mode change switch and the shift button switch, refer to Select Levers.

"P" RANGE SWITCH

1) Remove the console box.
2) Disconnect the connector.
3) Remove the connector from the base plate using a flat-tip screwdriver.





4) Disconnect the terminal of "P" range switch from connector, using a flat-tip screwdriver with thin tip.





5) Remove the clip while being careful not to break the pin, then remove the P range switch.





AT SHIFT LOCK SOLENOID

1) Remove the console box.
2) Disconnect the connector.
3) Remove the connector from the base plate using a flat tip screwdriver.





4) Remove the solenoid unit.





5) Remove the terminal of the solenoid unit, using a flat tip screwdriver.