Engine - Oil Filler Cap Gasket Comes Loose
NUMBER: 02-140-13DATE: 04/25/13
APPLICABILITY:
2011MY and Later, All Models with
FA or FB Engines
SUBJECT:
Oil Filler Cap Gasket Coming Unseated
INTRODUCTION
This Bulletin provides a procedure for reinstallation of the oil filler cap sealing ring in the event it comes unseated upon oil filler cap removal.
SERVICE PROCEDURE / INFORMATION
^ When removing the oil filler cap, if the sealing gasket has come loose, inspect it and the receiving groove (see photo below, left) for any dirt or debris. If any is found, remove the sealing gasket completely and clean it along with the receiving groove in the filler cap thoroughly.
^ Reinstall the sealing gasket into the oil filler cap receiving groove until fully seated with the squared edge up as shown in the photo, right.
Disclaimer