Removal

Fig. 1 Disconnecting parking brake cable joint:

1. Remove rear wheels.
2. Using slide hammer 09942-15510 and brake drum remover 09943-35511, remove drum. Before removing drum, increase the clearance between brake shoe and brake drum by removing parking brake shoe lever return spring (1), disconnecting parking brake cable joint (3) from parking brake shoe lever (2), Fig. 1, then remove parking brake shoe lever stopper plate.
3. Disconnect brake pipe from wheel cylinder. Plug all openings.
4. Remove four brake backing plate attaching bolts, then using slide hammer 09942-15510 and rear axle remover 09922-66010, remove axle shaft with brake backing plate.
5. Disconnect propeller shaft, then remove differential case attaching bolts, then differential.