Front Axle Bearing & Oil Seal

Fig. 5 Axle Shaft Bearing & Oil Seal:

1. Remove axle shaft referring to DRIVESHAFT SERVICE.
2. Remove oil seal, using plain screwdriver, Fig. 5.
3. Remove circlip.
4. Remove bearing from housing using bearing removal tool Nos. J29369-1 and J23907 or equivalents.
5. Reverse procedure to install noting the following:
a. Install bearing using bearing installation tool No. J8092 or equivalent.
b. Install oil seal with oil seal installation tool Nos. J37770 and J8092 or equivalents.