Crankshaft, Engine

SERVICE SPECIFICATIONS
Crank Pin Diameter:
Connecting Rod Bearing Size:
Standard 43.982-44.000 mm (1.7316-1.7322 inch)
0.25 mm (0.0098 inch) 43.732-43.750 mm (1.7218-1.7224 inch)
Out Of Round And Taper:
Limit 0.01 mm (0.0004 inch)
Bearing Clearance (As Used With Gaging Plastic):
Standard 0.020-0.050 mm (0.0008-0.0019 inch)
Limit 0.080 mm (0.0031 inch)
Runout:
Limit 0.06 mm (0.0023 inch)
Thrust Play:
Standard 0.11-0.31 mm (0.0044-0.0122 inch)
Limit 0.38 mm (0.0149 inch)

TORQUE SPECIFICATIONS
Crankshaft Timing Belt Pulley Bolt 110 Nm (79.5 ft. lbs.)