P1715 Park/Neutral Position Switch Malfunction

WIRING DIAGRAM





DETECTING CONDITION AND TROUBLE AREA

DTC CONFIRMATION PROCEDURE

WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road test should be carried out with 2 persons, a driver and a tester, on a level road.





(1) Connect scan tool to DLC with ignition switch OFF.
(2) Turn ON ignition switch and clear DTC, pending DTC and freeze frame data in ECM memory by using scan tool and start engine with P range and stop engine.
(3) Start engine in N range.
(4) Increase vehicle speed to 80-90 km/h (50-56 mph) in D range.
(5) Keep driving above vehicle speed for 1 min.
(6) Release accelerator pedal, decrease vehicle speed and stop vehicle.
(7) Check pending DTC by using scan tool.





TROUBLESHOOTING