Rear Suspension

NOTE:
^ All suspension fasteners are an important attaching part in that it could affect the performance of vital parts and systems, and/or could result in major repair expense. They must be replaced with one of the same part number or with an equivalent part if replacement becomes necessary. Do not use a replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to assure proper retention of this part.
^ Never attempt to heat, quench or straighten any suspension part. Replace it with a new part, or damage to the part may result.

GENERAL DESCRIPTION





Rear suspension is 5 link type of rigid axle which consists of coil springs, rear axle, shock absorbers, upper rods, lower rods and lateral rod.
The lower rod and upper rod are connected with the axle and body by using bushes so that axle moves up and down with bushes as their supporting points.
The shock absorber is installed between the body and axle to absorb up-and-down movement of the vehicle body.