With Manufacturers Scan Tool

DIAGNOSTIC TROUBLE CODE (DTC) CHECK




1. Turn ignition switch OFF.
2. After setting cartridge to Tech 1, connect it to data link connector (DLC) located on underside of instrument panel at driver's seat side.

Special tool
A: 09931 - 76011
B: Mass storage cartridge
C: 09931 - 76030

3. Turn ignition switch ON.
4. Read DTC according to instructions displayed on Tech 1 and print it or write it down. Refer to Tech 1 operator's manual for further details.
5. After completing the check, turn ignition switch OFF and disconnect Tech 1 from data link connector (DLC).