DTC 15

DTC C1015 (No. 15): G Sensor Circuit






DTC Detecting Condition
While a vehicle is at stop or running, if the potential difference between the sensor signal terminal "A14" and the sensor ground terminal "A4" is not within the specified voltage value, or if the signal voltage while at a stop does not vary from that while running, this DTC is set.
Therefore, this DTC may be set when a vehicle is lifted up and its wheel(s) is turned. In such case, clear the DTC and check again.

DTC Troubleshooting





Part 1 of 2





Part 2 of 2