P0335
DTC P0335: Crankshaft Position (CKP) Sensor Circuit MalfunctionWiring Diagram:
DTC Detecting Condition And Trouble Area:
DTC Confirmation Procedure
NOTE: Check to make sure that the following conditions are satisfied when using this DTC CONFIRMATION PROCEDURE.
- Intake air temperature: between -14 °C and 70 °C (6.8 °F and 158 °F)
- Atmospheric pressure: higher than 560 mmHg (Altitude: lower than 2790 m (9150 ft))
- The following DTC is not detected: P0340
1. With ignition switch OFF, connect scan tool.
2. Turn ON ignition switch and clear DTC by using scan tool if any.
3. Start engine and run it for 10 sec.
4. Check DTC by using scan tool.
Step 1:
Step 2 - 4:
DTC Troubleshooting