150000 MI or 240000 KM

Tighten/Torque
    Body and Frame
      For severe usage condition B, tighten bolts and nuts on the chassis at 6000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
Inspect
    Wheels
      Inspect each wheel disc for dents, distortion and cracks. Disc in badly damaged condition must be replaced.
    Wheel Bearing
    Suspension
    Steering and Suspension
      Visually inspect front and rear steering system for damaged, loose, or missing parts and signs of wear. Inspect power steering cables for proper hook-up, binding, cracks, chafing, etc. (if equipped).
    Steering
    Power Steering
      If equipped.
    Parking Brake System
      Inspect lever and cable.
    Ignition Coil
    Fuel Supply Line
      Check for loose connections, deterioration or damage which could cause leakage. Make sure all clamps are secure.
    Fuel Filler Cap
      Check cap and cap gasket for deterioration/damage. Check cap gasket for an even filler neck imprint.
    Exhaust System
      For severe usage conditions A,B,D and H, inspect every 6 months or 6,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first). For severe usage conditions C and E, inspect every 30 months or 30,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
    Drum Brake System
      For severe usage conditions A,B,C and H, inspect Drum and shoes - wear, damage every 6 months or 6,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first). For severe usage conditions D and E, inspect Drum and shoes - wear, damage every 15 months or 15,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
    Drive/Propeller Shaft
      For severe usage conditions B,D,E and H, inspect every 6 months or 6,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
    Drive Belt
      Check for cracks, wear and fluid contamination. Adjust tension if necessary.
    Disc Brake System
      For severe usage conditions A,B,C and H, inspect Discs and Pads - thickness, wear, damage every 6 months or 6,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first). For severe usage conditions D and E, inspect Discs and Pads - thickness, wear, damage every 15 months or 15,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
    Cooling System
      Inspect cooling system hoses and connections for leakage, wear and damage.
    Clutch Pedal Assembly
      Pedal height 20 mm (0.79 inches) above brake pedal height.
    Clutch Fluid
    Brake Pedal Assy
      Pedal free travel.
    Brake Hose/Line
      Check for leakage and damage. Check clamps for tightness.
    Brake Fluid
      Check fluid level and condition.
Replace
    Oil Filter, Engine
      For severe usage condition B, replace every 7.5 months or 7,500 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first). For severe usage conditions A,C,D,E and H, change every 3 months or 3000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
    Fuel Filter
    Fluid - Transfer Case
      For severe usage conditions B,E and H, replace every 15 months or 15,000 miles. For other usage conditions, check oil level. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
    Fluid - M/T
    Fluid - Differential
      Front and rear. For severe usage conditions B,E and H, replace every 15 months or 15,000 miles. For other usage conditions, check oil level. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
    Fluid - A/T
      For severe usage conditions B,E and H, replace every 15 months or 15,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
    Engine Oil
      For severe usage condition B, replace every 7.5 months or 7,500 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first). For severe usage conditions A,C,D,E and H, change every 3 months or 3000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
    Coolant
      Replace every 30 months or 30,000 miles. Check specific gravity for freezing point.
    Cabin Air Filter / Purifier
      If equipped.
    Air Filter Element
Rotate
    Tires
      Inspect for damage, debris and uneven wear. Check and adjust inflation pressures.