Without Scan Tool

DTC Check




Not Using Suzuki Scan Tool
1. Check that malfunction indicator lamp ("AIR BAG" warning lamp) (1) comes ON when ignition switch is turned ON. If it does not come ON, proceed to ""Air Bag" Warning Lamp Does Not Come ON".
2. Using service wire (7), ground diagnosis switch terminal (4) (or connect to ground terminal (5) in "AIR BAG" monitor coupler (3).
3. Read DTC from flashing pattern of malfunction indicator lamp ("AIR BAG" warning lamp) (1). (Refer to "DTC Table").
4. After completing the check, turn ignition switch OFF and disconnect service wire (7) from "AIR BAG" monitor coupler (3).

Malfunction Indicator Lamp ("Air Bag "warning Lamp) flashing Pattern (Example:DTC 22 Is Set.):

Malfunction indicator lamp ("AIR BAG" warning lamp) flashing pattern (Example: DTC 22 is set.))