Rear

Construction





Rear suspension is 5 link type of rigid axle which consists of coil springs, rear axle, shock absorbers, upper rods, lower rods and lateral rod.
The lower rod and upper rod are connected with the axle and body by using bushes so that axle moves up and down with bushes as their supporting points.
The shock absorber is installed between the body and axle to absorb up-and-down movement of the vehicle body.

CAUTION:
^ The shock absorber is non-adjustable, non-refillable, and cannot be disassembled.
^ The only service the shock absorber requires is replacement when it has lost its resistance, is damaged, or leaking fluid.

NOTE: When installing differential gear oil drain plug, clean the thread portion of the plug and then apply sealant (SUZUKI BOND No. 1215, 99000-31110) to the portion.