Ignition Switch: Service and Repair

IGNITION (MAIN) SWITCH REMOVAL AND INSTALLATION

Reference: Ignition (Main) Switch On-Vehicle Inspection

REMOVAL
1. Disconnect negative ( ) cable at battery.
2. Disable air bag system. For H25 engine model, refer to Disabling Air Bag System:H25 Engine Model. For H27 engine model, refer to Disabling Air Bag System:H27 Engine Model (Advanced Air Bag).
3. Remove steering lock assembly (ignition switch) from steering column referring to Steering Lock Assembly (Ignition Switch) Removal and Installation.

INSTALLATION
1. Install steering lock (ignition switch) to steering column referring to Steering Lock Assembly (Ignition Switch) Removal and Installation.
2. Enable air bag system.
For H25 engine model, refer to Enabling Air Bag System:H25 Engine Model.
For H27 engine model, refer to Enabling Air Bag System:H27 Engine Model (Advanced Air Bag).

NOTE: When installing steering column, special care must be taken for tightening sequence and its torque.