Without Scan Tool

"O/D OFF" Lamp Operation Check
1. Turn ignition switch ON.
2. Check that "O/D OFF" lamp lights for about 2 - 4 seconds and then goes OFF. If anything faulty is found, advance to -O/D OFF Light Does Not Light at Ignition Switch ON: 5 A/T or "O/D OFF" Light Comes ON Steadily: 5 A/T.

"POWER" Lamp Operation Check
1. Check that Power/Normal change switch button is at Normal position.
2. Turn ignition switch ON.
3. Check that "POWER" lamp lights for about 2 - 4 seconds and then goes OFF. If anything faulty is found, advance to -POWER- Light Does Not Light at Ignition Switch ON: 5 A/T or "POWER" Light Comes ON Steadily: 5 A/T.