Combination Meter
Combination Meter Removal and InstallationRemoval
1. Disconnect negative (-) cable at battery.
2. Remove steering column hole cover (1).
3. Disable air bag system referring to Disabling Air Bag System.
4. Tilt steering column fully down position.
5. Remove combination meter cluster panel (1).
6. Remove screws (1) fastening combination meter.
7. Disconnect couplers from combination meter.
8. Remove combination meter from instrument panel.
Installation
Reverse removal procedure for installation, noting the following.
- Be sure to enable air bag system after installation referring to Enabling Air Bag System.