A/T Fluid Change

A/T Fluid Change
1. Lift up vehicle.
2. When engine is cool, remove drain plug from oil pan and drain A/T fluid using oil gutter (1).





3. Install drain plug.
Tightening Torque
A/T fluid drain plug 20 Nm (2.0 kgf-cm, 14.5 ft. lbs.)
4. Lower vehicle and fill proper amount of specified fluid.








5. Check fluid level.
A/T fluid specification
Equivalent of DEXRON-III
A/T fluid capacity reference value
When draining from drain plug hole: Approximately 3.0 liters (1.41/1.70 US/Imp. pt.)
When overhauling: Approximately 10.3 liters (4.83/5.85 US/Imp. pt.)