60000 MI or 96000 KM
Tighten/TorqueBody and Frame
For severe usage condition B, tighten bolts and nuts on the chassis at 6000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
Inspect
Wheels
Inspect each wheel disc for dents, distortion and cracks. Disc in badly damaged condition must be replaced.
Wheel Bearing
Suspension
Steering and Suspension
Visually inspect front and rear steering system for damaged, loose, or missing parts and signs of wear. Inspect power steering cables for proper hook-up, binding, cracks, chafing, etc. (if equipped).
Steering
Power Steering
If equipped.
Parking Brake System
Inspect lever and cable.
Ignition Coil
Fuel Tank
Fuel Supply Line
Check for loose connections, deterioration or damage which could cause leakage. Make sure all clamps are secure.
Fuel Filler Cap
Emission Control Systems
Inspect emission related hoses and tubes.
Drum Brake System
For severe usage conditions A,B,C and H, inspect Drum and shoes - wear, damage every 6 months or 6,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first). For severe usage conditions D and E, inspect Drum and shoes - wear, damage every 15 months or 15,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
Drive/Propeller Shaft
For severe usage conditions B,D,E and H, inspect every 6 months or 6,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
Disc Brake System
For severe usage conditions A,B,C and H, inspect Discs and Pads - thickness, wear, damage every 6 months or 6,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first). For severe usage conditions D and E, inspect Discs and Pads - thickness, wear, damage every 15 months or 15,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
Cooling System
Inspect cooling system hoses and connections for leakage, wear and damage.
Clutch Fluid
Brake Pedal Assy
Pedal free travel.
Brake Hose/Line
Check for leakage and damage. Check clamps for tightness.
Replace
Spark Plug
Oil Filter, Engine
For severe usage condition B, replace every 7.5 months or 7,500 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first). For severe usage conditions A,C,D,E and H, change every 3 months or 3000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
Fluid - Transfer Case
Fluid - M/T
Fluid - Differential
Front and rear. For severe usage conditions B,E and H, replace every 15 months or 15,000 miles. For other usage conditions, check oil level. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
Fluid - A/T
For severe usage conditions B,E and H, replace every 15 months or 15,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
Exhaust System
Replace rubber exhaust mountings and inspect exhaust system.
Evaporative Canister Filter
For severe usage condition C, replace every 60 months or 60,000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
Engine Oil
For severe usage condition B, replace every 7.5 months or 7,500 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first). For severe usage conditions A,C,D,E and H, change every 3 months or 3000 miles. For definitions of letter codes, refer to Severe Usage Condition Codes (Read this first).
Drive Belt
Coolant
Replace every 30 months or 30,000 miles. Check specific gravity for freezing point.
Cabin Air Filter / Purifier
If equipped.
Brake Fluid
Flush and bleed system.
Air Filter Element
Rotate
Tires
Inspect for damage, debris and uneven wear. Check and adjust inflation pressures.