Front Suspension

Front
Check suspension bolts and nuts for tightness and retighten them as necessary.

Repair or replace defective parts, if any.

NOTE: For details of check points referring to "Tightening Torque Specifications: "and "Tightening Torque Specifications:".





- Check bushing for damage, wear or deformation.
- Check stabilizer bar for damage or deformation.




- Inspect strut for damage, deformation, oil leakage and operation. If strut is found faulty, replace it as an assembly unit, because it can not be disassembled. Refer to "Strut Damper and / or Coil Spring Check: " for operation check.
- Inspect strut boot for damage or crack.
- Inspect for cracks or deformation in spring seat.
- Inspect for deterioration of bump stopper.
- Inspect strut mount for wear, cracks or deformation.




- Check ball joint stud dust seal (boot) for leaks, detachment, tear or other damage.
- Check suspension arm bushing for damage, wear or deterioration.
- Check other suspension parts for damage loose or missing parts; also for parts showing signs of wear or lack of lubrication. Replace any parts found defective.