Clutch Pedal Position (CPP) Switch Inspection and Adjustment

Clutch Pedal Position (CPP) Switch Inspection and Adjustment
Reference: Clutch Pedal Position (CPP) Switch Removal and Installation

Inspection
Check for resistance between terminals under each condition below. If check result is not satisfactory, replace.





Adjustment
With clutch pedal (1) fully depressed, adjust switch (2) position so that clearance between end of thread and clutch pedal bracket is within specification.

Clearance between end of thread and clutch pedal bracket
"a": 1.8 mm (0.07 inch)