Precaution For Vehicle Equipped With ESP(R) System

Precaution for Vehicle Equipped with ESP(R) System

- When testing with any of the following equipments (when vehicle is tested by rotating wheels (tires) under vehicle stop), be sure to deactivate ESP(R) system referring to Precautions in Speedometer Test or Other Tests to obtain correct data.
When vehicle acceleration is not sensed and wheels are rotating, ESP(R) control module judges that wheels are in slip condition and controls engine torque to reduce by TCS control.
- 2 or 4-wheel chassis dynamometer
- Speedometer tester
- Brake tester
- Etc.

ESP(R) control module
- When ESP(R) control module is removed / installed, do not use impact wrenches which generate shock or impact to avoid damaging sensors in ESP(R) control module.
- When any of the following operation is done, calibrate steering angle sensor, G sensor and master cylinder pressure sensor (in ESP(R) control module) referring to Sensor Calibration.
- When battery or dome fuse is removed.
- When steering angle sensor is replaced.
- When ESP(R) control module is removed.
- When yaw rate / G sensor assembly is removed.