Camshaft Intermediate Drive Chain Idler Installation Right Side (Fourth Design)

Camshaft Intermediate Drive Chain Idler Installation Right Side (Fourth Design)





1. Ensure that the right camshaft intermediate drive chain idler (1) is being installed. The recessed hub (4) and the smaller sprocket of the right camshaft intermediate drive chain idler is installed outward. The raised hub and the larger sprocket of the right camshaft intermediate drive chain idler is installed towards the block.





2. Install the right camshaft intermediate drive chain idler.

CAUTION:
Refer to [Fastener Notice].

3. Install the camshaft intermediate drive chain idler bolt.
Tightening torque
Tighten the camshaft intermediate drive chain idler bolt to 58 Nm (43 lb ft).