Heater Inlet Pipe Replacement

Heater Inlet Pipe Replacement

Removal Procedure





1. Partially drain the cooling system.
2. Remove the heater pipe inlet hose (1) from the heater inlet pipe.





3. Remove the heater inlet pipe housing bolts (1).
4. Remove the housing.
5. Remove the heater inlet pipe housing seal. Discard seal.

Installation Procedure





1. Install a NEW heater inlet pipe housing seal.

CAUTION:
Refer to [Fastener Notice].

2. Install the heater inlet pipe housing bolts (1).
Tightening torque
Tighten the heater inlet housing bolts to 10 Nm (89 lb in).





3. Install the heater inlet hose (1) to the heater inlet pipe.
4. Refill the cooling system.