Power Steering Fluid Reservoir Outlet Hose Replacement
Power Steering Fluid Reservoir Outlet Hose ReplacementRemoval Procedure
1. Remove the fuel injector sight shield.
2. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
3. Remove the right side engine splash shield.
4. Place drain pans under the vehicle as needed.
5. Compress the power steering reservoir outlet hose clamp (1) and disconnect the power steering reservoir outlet hose (2) from the remote power steering fluid reservoir.
6. Compress the power steering reservoir outlet hose clamp (1) and disconnect the power steering reservoir outlet hose (2) from the power steering pump.
7. Remove the power steering reservoir outlet hose.
Installation Procedure
1. Position the power steering reservoir outlet hose to the vehicle.
2. Compress the power steering reservoir outlet hose clamp (1) and connect the power steering reservoir outlet hose (2) to the power steering pump.
3. Compress the power steering reservoir outlet hose clamp (1) and connect the power steering reservoir outlet hose (2) to the remote power steering fluid reservoir.
4. Clean any excess power steering fluid from the vehicle and remove the drain pans.
5. Install the right side engine splash shield.
6. Install the fuel injector sight shield.
7. Fill and bleed the power steering system.