Input and Output Speed Sensor Installation

Input and Output Speed Sensor Installation





CAUTION:
Use care when installing the speed sensors or damage may occur to the speed sensors or the transaxle case.

1. Install NEW speed sensor O-rings (63).
2. Install the output speed sensor (62) and the input speed sensor (73).

CAUTION:
Refer to [Fastener Notice]

3. Install the M6 x 1.0 x 16 mm speed sensor bolts (61).
Tightening torque
Tighten the speed sensor bolts (61) to 5 Nm (44 in. lbs.).
4. Connect the input and output speed sensor harness assembly (71) to the speed sensors and the TCM.