Front Door Window Motor: Service and Repair
Front Side Door Window Regulator Motor ReplacementRemoval Procedure
1. Remove the front door trim panel.
2. Remove the water deflector.
3. Disconnect the electrical connector from the front door window regulator motor.
4. Remove the window from the regulator.
a. Raise the window.
b. Tape the window into position.
5. Remove the front door window regulator motor screws.
Installation Procedure
1. Align the front door window regulator motor assembly to the front door window regulator.
CAUTION: Refer to [Fastener Notice] in Cautions and Notices.
2. Install the front door window regulator motor to regulator screws.
Tightening torque
Tighten the front door window regulator motor to door screws to 8 N.m (71 lb.in).
3. Connect the electrical connector to the front door window regulator motor.
4. Install the water deflector.
5. Install the front door trim panel.