Headliner: Service and Repair

Headlining: Removal And Installation







REMOVAL

CAUTION: Disconnect both the negative and positive battery terminals in advance.

1. Disconnect the negative and positive battery terminals, then wait at least 3 minutes.
2. Remove body side trim panels. Refer to [Body Side Trim: Component].
3. Remove rear trim. Refer to [Headlining: Removal and Installation].
4. Remove sun visor assemblies, both LH and RH.
5. Remove sun visor holders LH and RH.
6. Remove roof console (if equipped).
- Disconnect harness.

7. Remove room lamp.
- Disconnect harness.

8. Remove striker covers (King Cab only).
9. Remove assist grips.
10. Remove rear window glass (Crew Cab only). Refer to [Rear Window Glass and Molding: Removal and Installation].
11. Remove headlining.

NOTE: Use an assistant to steady the headlining while lowering from roof.

- Remove clips from center of headlining (if equipped).
- Remove headlining by tilting through rear window opening on Crew Cab models.

12. Remove assist grip brackets from roof.

INSTALLATION

Installation is in the reverse order of removal.