Fuel Pump: Testing and Inspection
Fuel Pump Circuit CheckDescription
SYSTEM DESCRIPTION
COMPONENT DESCRIPTION
A turbine type design fuel pump is used in the fuel tank.
Diagnosis Procedure
Step 1-4:
Step 5-6:
Step 7-12:
Component Inspection
FUEL PUMP
1. Disconnect "fuel level sensor unit and fuel pump" harness connector.
2. Check resistance between "fuel level sensor unit and fuel pump" terminals 1 and 3.
Resistance: Approximately 0.2 - 5.0 ohms [at 25 °C (77 °F)]