Spark Plug Removal and Installation
Spark Plug Removal and InstallationREMOVAL
1. Remove the engine room cover using power tool.
2. Remove the ignition coil.
3. Remove the spark plug using a suitable tool.
CAUTION: Do not drop or shock it.
INSPECTION AFTER REMOVAL
- Do not use a wire brush for cleaning.
- If the spark plug tip is covered with carbon, spark plug cleaner may be used.
Cleaner air pressure : Less than 588 kPa (5.9 bar, 6 kg/cm2, 85 psi)
Cleaning time : Less than 20 seconds
- Checking and adjusting spark plug gap is not required between change intervals.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION: Do not drop or shock the spark plug.
