Operation CHARM: Car repair manuals for everyone.

P1211

P1211 TCS Control Unit

Description

The malfunction information related to TCS is transferred through the CAN communication line from "ABS actuator and electric unit (control unit)" to ECM.
Be sure to erase the malfunction information such as DTC not only for "ABS actuator and electric unit (control unit)" but also for ECM after TCS related repair.

On Board Diagnosis Logic
Freeze frame data is not stored in the ECM for this self-diagnosis. The MIL will not illuminate for this self-diagnosis.

P1211:






DTC Confirmation Procedure

TESTING CONDITION:
Before performing the following procedure, confirm that battery voltage is more than 10.5 V at idle.

1. Start engine and let it idle for at least 60 seconds.
2. Check 1st trip DTC.
3. If 1st trip DTC is detected, go to [P1211 TCS Control Unit].

Diagnosis Procedure
Go to [Diagnosis and Repair Workflow] or [Diagnosis and Repair Workflow]. Diagnosis and Repair Work Flow