Oil Pump: Removal and Installation

Oil Pump: Removal and Installation

REMOVAL
1) Remove oil pans (lower and upper).
2) Remove front timing chain case and timing chain (primary).
3) Remove the oil pump assembly.

INSTALLATION
Installation is in the reverse order of removal, paying attention to the following.
^ When installing, align crankshaft flat faces with inner rotor flat faces.

INSPECTION AFTER INSTALLATION
1) Check the engine oil level.
2) Start the engine and check for engine oil leaks.
3) Stop engine and wait for 10 minutes.
4) Check the engine oil level and adjust engine oil level as required.